top of page
Flux XF

Achieve enhanced responsiveness and smooth maneuverability. The base design prioritizes efficient power transfer to the board while incorporating a large stabilizer on the heel side. By using materials with excellent rebound properties, it expands the range of motion without compromising power transfer to the board. Additionally, the Boost FootOn+ is 4 mm higher than the standard footbed and features a softer center section. This allows it to form a concave shape under pressure, enabling more powerful edging.

​

Flex: medium

​

​Size: XS / S / M / L

​

​

​

​

​

Color:

2627XF_BK.png
2627XF_WH.png
2627XF_RED.png
2627XF_MHAK.png

Black

White

Red

Mhak Camo1

2627XF_L.OLI.png

L.Olive

2627XF_RASMAN.png

Rasman

2627XF_LGRAY.png

Light Gray

2627XF_YUKIOTOKO.png

Yukiotoko

2627XF_SDR.png

S.D.R

HIGHBACK

 

- Retro-Mod Highback:

The outside has a symmetrical shape with a classical look. The asymmetrical structure on the inside has resilience while following the movement of the boot, improving torsion control during landing.

​

- Super Tough Nylon:

Medium flex material for all-round use from low speed to high speed, beginner to expert.

​

- Redux Lean Adjuster:

Lighter weight due to smaller size. Easy adjustment with one action.

​

- Micro Adjuster:

If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.

BASEPLATE
 

- Super Ultima Baseplate:

FLUX's new generation standard equipped with a stabilizer that converts power transmission into repulsive force in order to maximize the playing of the board.

​

- Performance Blend:

Medium flex for the most all-round use. It corresponds to every riding scene.

​

- Boost FootOn+:

The center is made of a soft material, and when you step on it, it naturally becomes a concave shape, making it easy to get crowded with your toes and heels. Of course, the surface is made of a material that does not easily adhere snow.

​

- Adjustable Toe & Heel Cushion:

Movable cushion that can be adjusted toe side and heel site according to boot size and board width.

​

- Responsive Stabilizer:

A large stabilizer designed for XF with an emphasis on quick response and power transmission. It boasts high response performance while protecting the board using a TPU material with high resilience.

​

- 5 Holes Highback Rotation:

Five highback mounting holes allow rotation at both foot forward angles.

​

- Flat Bottom:

The base plate has a flat shape with fewer bumps on the underside, allowing for direct power transmission while still taking care of the top sheet of the board.

STRAP

 

- Waffle Strap:

A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you're wearing it, and a Power Strap that transmits power directly.

​

- Beer Buckle:

Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don't have to worry about when toasting.

​

- FTM VER.5.0:

In order to increase the transmission of power, the center line is strong, and the upper and lower ends are more flexible to enhance the fit with the boots.

​

- L-Guide:

The belt can be stored smoothly to avoid getting caught in the snow during toeside turns.

​

- UU Fit:

By attaching a strap belt between the heel cup and the highback, the system wraps the boots from 360 degrees. This realizes a natural hold feeling and equalization of pressure.

​

additional features: 

​

- Multi Disc:

A multi-disc that can be attached to either 4x4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.

​

- Toolless Lever:

The best setting is possible without tools. Comes with a stopper to prevent screws from loosening.

bottom of page