top of page
Flux SR

Powder, terrain and style.
With a solid baseplate and flexible highback, this model allows you to enjoy powerful freeriding in style, from powder to carving.

Furthermore, this season, the adoption of Boost FootOn, which is 4mm higher than the normal footbed, enables even quicker turning and stable edging.

Flex: soft

size: XS / S / M / L


Flux SR black



• Solid:

Narrow in the middle for more flex at the top, eliminating stress on the boots and the rider’s ankles.


• Super Tough Nylon Ver. 2.0 Soft:

 A soft flex material developed to expand the range of motion of the foot in powder riding.

• Micro Adjuster:

 If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.


• Transfer:

Offers unmatched power transfer and direct response with an ultra-lightweight design.


• Performance Blend:

A nylon and fiberglass mix for all-around performance.


• Boost Foot On:

A footbed with a 4mm higher cushion than the conventional FootOn. It prevents drag during turns and absorbs fine vibrations while improving response when turning. Of course, the surface is made of a material that does not easily adhere snow.


• Adjustable Toe & Heel Cushion:

A movable cushion that can be adjusted to suit the boot size and board width.


• Recycle Blend:

A new material made by reusing leftover PET film, etc., which was conventionally discarded. Glass fiber is blended in a setting that efficiently transmits force to the board and also has high follow ability to the movement of the boot.


• Waffle Strap:

Waffle-shaped cushioning provides ample hold and unparalleled comfort, and the two-layer construction offers direct power transfer.


• Beer Buckle: 

Newly engineered buckles give you more leverage when cranking down on the straps, allowing you to get to the last click with minimal effort. Features a bottle opener for that well-earned drink.


• F.T.M VER.5.0: 

The middle of the strap uses a more rigid material for increased power transfer, with top and bottom ends using a more flexible material for a better boot fit. Exclusively for use with the Transfer base.


• L-Guide: 

Easily stows ratchet straps.


• UU Fit: 

The strap system that provides a 360-degree hold, providing a natural hugging feeling and uniform pressure.


• Multi Disc:

A multi-disc that can be attached to either 4x4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.

• Toolless Lever:

The best setting is possible without tools. Comes with a stopper to prevent screws from loosening.

bottom of page