top of page

Further mobility and response
The double combination of special carbon-blended base plate and disc leads to a different dimension of movement and response. For deep curving - the CV LTD! 

​The higher heelcup is effective to improve operability and prevent from dragging. With a full range of adjustment functions, setting can be made depending on the situation. The perfect binding for All Mountain riders. 
In addition, the use of Boost FootOn, which is 4mm higher than the normal footbed, enables even quicker turning and stable edging.

Flex: medium

size: S / M / L


Flux CV LTD black



• Buffalo:
It features two pillars that look like buffalo horns. Supports the flat highback surface from both sides.

• Super Tough Nylon:
Medium flex material for all rounds from low speed to high speed, from beginner to expert.

• Hybrid Insert cushion:
The integrally molded highback cushion does not harden even at low temperatures, and by maintaining high grip in all conditions, it holds the boot firmly and realizes a stable turn.

• Redux Lean Adjuster:
Lighter and smaller. Easy to adjust with one action.

• Micro Adjuster:

If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.


• Super Transfer:

Thanks to the heel cup, which is about 15mm higher than the transfer base, the backside response is incomparable. Also, it is difficult to drag.


• super carbon blend

Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.


• Boost Foot On

A footbed with a 4mm higher cushion than the conventional FootOn. It prevents drag during turns and absorbs fine vibrations while improving response when turning. Of course, the surface is made of a material that does not easily adhere snow.


• Adjustable Toe & Heel Cushion

Movable cushion that can be adjusted toe side and heel site according to boot size and board width.


• 4 Corner Stabilizer

The powerful power generated by the high heel cup is firmly and gently transferred to the board by the stabilizer.


• 5 Holes High back rotation

Five high back mounting holes that allow rotation at both feet forward swing angles.


• super carbon blend

Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.


• Waffle Strap:

A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you're wearing it, and a Power Strap that provides direct power transmission.


• Beer Buckle:

Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don't have to worry about when toasting.


• FTM VER.5.0:

In order to increase the transmission of power, the center line is strengthened, and the upper and lower ends are made more flexible to enhance the fit with the boots.


• L-Guide:

The belt can be stored smoothly to avoid getting caught in the snow during toeside turns.                                        

• UU Fit:

By attaching a strap belt between the heel cup and high back, the system wraps around the boot from 360 degrees. This realizes a natural hold feeling and equalization of pressure.


• Multi Disc:

A multi-disc that can be attached to either 4x4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.


• carbon disc:

A special carbon-blended rotary disc leads to another dimension of movement and response.


• Toolless Lever:

The best setting is possible without tools. Comes with a stopper to prevent screws from loosening.


• Titanium Screw:

A mounting screw that achieves 50% weight reduction and further strength by compounding titanium alloy.

bottom of page